Parameter Uncertainty and Policy Intensity: Some Extensions and Suggestions for Further Work

The effects of parameter uncertainty on optimal policy have been a matter of interest for academics, and even for some policymakers, for a long time. Two lines of literature have developed analytical results on this matter. The first line uses static models and the second dynamic models. In this dynamic line most of the results are confined to models with a single state and a single control variable. In this paper we want to encourage the analysis of more general dynamic cases. To do so, the results in the dynamic line are extended from one-state and one-control finite horizon models to models with a pair of control variables. We then discuss some of the hurdles which must be surmounted for the results to be made more general and suggests some lines for further research. JEL classification: C61; E61     

Failure mechanism study of anisotropic conductive film (ACF) packages

Anisotropic conductive film (ACF) consists of an adhesive polymer matrix with dispersed conductive particles. In flip-chip technology, ACF has been used in place of solder and underfill for chip attachment to glass or organic substrates. The filler particles establish the electrical contacts between the interconnecting areas. ACF flip-chip bonding provides finer pitch, higher package density, reduced package size and improved lead-free compatibility. Nevertheless, the interconnection is different from traditional solder joints, the integrity and durability of the ACF interconnects have major concerns. Failures in anisotropic conductive film (ACF) parts have been reported after temperature cycling, moisture preconditioning and autoclave. The failures have not been well understood and have been attributed to a wide variety of causes. This paper investigates the failure mechanism of ACF using finite element simulation. From a failure-initiation point of view, the response of ACF packages to environmental (temperature and humidity) exposure is very different from standard underfilled packages. These differences cause the ACF package to fail in different ways from an underfilled package. Simulation results have shown that moisture-induced ACF swelling and delamination is the major cause of ACF failure. With moisture absorption, the loading condition at the interface is tensile-dominant, which corresponds to lower interface toughness (or fracture resistance). This condition is more prone to interface delamination. Therefore, the reliability of ACF packages is highly dependent on the ACF materials. The paper suggests a new approach toward material selection for reliable ACF packages. This approach has very good correlation with experimental results and reliability testing of various ACF materials.     

A novel model for arc territory design: promoting Eulerian districts

The problem of district design for the implementation of arc routing activities is addressed. The aim is to partition a road network into a given number of sectors to facilitate the organization of the operations to be implemented within the region. This problem arises in numerous applications such as postal delivery, meter readings, winter gritting, road maintenance, and municipal solid waste collection. An integer linear programming model is proposed where a novel set of node parity constraints to favor Eulerian districts is introduced. Series of instances were solved to assess the impact of these parity constraints on the objective function and deadhead distance. Networks with up to 401 nodes and 764 edges were successfully solved. The model is useful at a tactical level as it can be used to promote workload balance, compactness, deadhead distance reduction and parity in districts.     

Calculation of refractive indices using Buchdahl's chromatic coordinate

In this paper we have completed an error analysis of the Buchdahl glass model for 813 glasses available from five manufacturers. A quadratic model has a standard deviation of 0.00002 and a maximum absolute error of 0.0001 in the visible spectral region. A cubic model has a standard deviation of 0.00005 and a maximum absolute error of 0.00026 over the full spectral region from 0.365 to 1.014 microm. A table giving the Buchdahl fitting coefficients for all the glasses, as well as the standard deviation and maximum error for each glass, is included for the quadratic model. The results indicate that the Buchdahl model is ideally suited for theoretical studies of refracting optical systems.     

Worm algorithms for the 3-state Potts model with magnetic field and chemical potential

We discuss worm algorithms for the 3-state Potts model with external field and chemical potential. The complex phase problem of this system can be overcome by using a flux representation where the new degrees of freedom are dimer and monomer variables. Working with this representation we discuss two different generalizations of the conventional Prokof’ev–Svistunov algorithm suitable for Monte Carlo simulations of the model at arbitrary chemical potential and evaluate their performance.     

Analysis of flip-chip packaging challenges on copper/low-k interconnects

An interfacial-fracture-mechanics-based simulation methodology has been developed to study the flip-chip packaging effect on the copper/low-k structures. Multilevel submodeling techniques have been used to bridge the scale difference between the flip-chip packages and the metal/dielectric stacks. To achieve a smaller feature size and higher speed in future chips, SiO/sub 2/ can be replaced with low-k dielectric material in all via and trench layers or the number of metal layers can be increased. The effect of both packaging options has been evaluated. With either option, the future flip-chip copper/low-k packages are facing higher possibilities of adhesive or cohesive failure near the low-k interface. This paper provides a quantitative evaluation of the increased risk, thus providing guidelines to the next level of low-k flip-chip packages.     

Teaching Macroeconomics with GAMS

Our general goal in this paper is to show how to implement in GAMS standard deterministic nonlinear macro models, and stochastic linear macro models with rational expectations. We will also present basic concepts on solution methods and policy analysis for these kinds of models. As a practical illustration, we will use some well known teaching and experimental models in the macroeconomic literature.     

Effect of Proximity and Dimension of Two Artificial Pitting Holes on the Fatigue Endurance of Aluminum Alloy AISI 6061-T6 Under Rotating Bending Fatigue Tests

This work deals with the study of the two artificial pitting holes effects, caused by their dimensions and proximity, on the fatigue endurance of aluminum alloy AISI 6061-T6 under rotating bending fatigue tests. Stress concentration induced by artificial pitting holes is analyzed and correlated with the experimental fatigue life. It is found that the stress concentration increases exponentially when the two pitting holes approach, and this induces an important reduction in the fatigue life. Concerning the diameter variation of one pitting in regard to the second, no important influence was observed on fatigue life for a given separation between them; this implies that the separation between the two artificial pitting holes and the associated stress concentration is the principal parameter on the fatigue life under these conditions. Finally, results are discussed and conclusions are presented involving the fatigue life, proximity, and dimension of pitting holes, stress concentration factor, and fracture surfaces where the failure origin is identified.     

Synthesis of α‐cellulose/polypyrrole composite for the removal of reactive red dye from aqueous solution: Kinetics and equilibrium modeling

In this work, a composite from α‐cellulose coated with conducting polypyrrole by in situ polymerization using potassium persulfate as oxidant was obtained. The composite was characterized by fourier transform infrared (FTIR) spectroscopy, cyclic voltammetry, UV/Vis spectroscopy, and scanning electron microscopy (SEM) analysis showed homogeneous coating of α‐cellulose with polypyrrole (PPy) to produce a composite with a conductivity of 3.5 × 10⁻⁵ S/m. Batch aqueous adsorption experiments of the reactive red 120 (RR120) dye onto the synthesized material were conducted. The results showed that this composite is an efficient adsorbent for RR120 dye removal. For the adsorption experiments set to an initial pH of 3.9, the adsorption capacity was 15.6 mg of dye/g of composite for an equilibrium concentration (in the liquid) of RR120 dye equal to 1,000 mg/L, whereas a value of 96.1 mg of dye/g of composite was obtained when the solution pH was set to 2.0 for the same equilibrium concentration. When performing adsorption experiments using pure α‐cellulose, dye adsorption was insignificant at any pH value. Adsorption isotherm for RR120 was described by a typical Freundlich model. The transient adsorption of RR120 on the synthesized composite was described by a general three‐resistance model that includes the transport on the film that surrounds the composite particles, diffusion inside the particles, and adsorption on the surface of the particles. A fitting of the uptake curves was performed allowing the estimation of values for the effective diffusivity, D₀, and the adsorption rate coefficient, k₁. For the adsorption experiments with an initial pH value set to 3.9, D₀ was estimated as 1.05 × 10⁻¹⁰ m²/s, whereas k₁ was 1.65 × 10⁻⁴ Lⁿ/g mg^{n − 1} s; the corresponding values of k₁ at pH = 2 and 9.0 were 3.18 × 10⁻⁴ and 5.16 × 10⁻⁵, respectively. POLYM. COMPOS., 36:312–321, 2015. © 2014 Society of Plastics Engineers     

Ultrasonic extraction and field-portable anodic stripping voltammetric measurement of lead in dust wipe samples

Dust wipe samples were subjected to ultrasonic extraction (UE) in diluted nitric acid, and then analyzed for lead content using field-portable anodic stripping voltammetry (ASV). Recoveries of lead were determined from wipe materials which were spiked with certified reference materials (CRMs) containing known quantities of lead. Four different wipe materials and four different CRMs were tested, with and without filtration of aliquots of sample extract through 0.45 microm hydrophilic polytetrafluoroethylene filters. The CRMs consisted of paint, soil, particulate, and dust matrices. Wipe materials were chosen from those which have been found to meet the performance aspects of an ASTM standard specification. UE/ASV experiments were carried out in accordance with newly published ASTM procedures for on-site extraction and electroanalysis. Recoveries were found to vary for different wipe materials and CRMs. For several CRMs, quantitative (80--120%) recoveries for UE/ASV were observed for one wipe material whether filtration was used or not, while other wipe materials required filtration for quantitative recovery. In the case of one wipe material which contained detergents, quantitative recoveries could not be achieved whether filtration was used or not. The total analysis time for a sample set of 6--12 samples was 60--90 min, including extraction time and sample manipulation. The results of this work have provided information on the choice of wipe materials that can be used for quantitative lead measurements by UE/ASV in materials that are representative of sources of lead in surface dust.